3GPP Specification

3GPP Specification

The latest CPCH-related Specification in UMTS can be found at www.3gpp.org via the following links:

TSG RAN WG1 - Radio Layer 1 specification

TS 25.211 v. 3.5.0 (2000-12)
Physical channels and mapping of transport channels onto physical channels (FDD) (Release 1999)

Section 4.1.2.5 CPCH - Common Packet Channel
Section 5.2.2.2 Physical Common Packet Channel (PCPCH)
Section 7.4 PCPCH/AICH timing relation

TS 25.212 v. 3.5.0 (2000-12)
Multiplexing and channel coding (FDD) (Release 1999)

Section 4.2.3 Channel coding
Section 4.2.13.3 Common Packet Channel (CPCH)

TS25.213 v. 3.4.0 (2000-12)
Spreading and modulation (FDD) (Release 1999)

Section 4.3.4 Common packet channel codes

TS25.214 v.3.5.0 (2000-12)
Physical layer procedure (FDD) (Release 1999)

Section 6.2 CPCH Access Procedures

TSG RAN WG2 - Radio Layer 2 specification and Radio Layer 3 RR specification

TS 25.301 v. 3.6.0 (2000-09)
Radio Interface Protocol Architecture (Release 1999)

Section 5.2.1 L1 Services
Section 5.3 Layer 2 Services and Functions
Section 5.3.1.1.2 Mapping between logical channels and transport channels
Section 5.3.5.10 Data flow for DCCH mapped to CPCH
Section 5.3.5.16 Data flow for DTCH (non-transparent RLC) mapped to CPCH
Section 5.4.2 RRC functions
Section 5.6.4 Protocol termination for CPCH
Section 6.1 UE identification on the radio interface

TS 25.302 v 3.7.0 (2000-12)
Services provided by the Physical Layer (Release 1999)

Section 6 Model of physical layer of the UE
Section 6.1 Uplink models
Section 7.2 Types of Transport Channels
Section 8.1 FDD Uplink
Section 10.3 Parameter definition
Section 10.3.3.8 PCPCH (Physical Common Packet Channel)

TS 25.303 v 3.6.0 (2000-12)
Interlayer Procedures in Connected Mode (Release 1999)

Section 4 General Description of Connected Mode
Section 5 Radio Bearer Control - Overview of Procedures
Section 6.2.1.1.5 Radio Bearer Establishment with CPCH Channel Allocation
Section 6.3.3 Acknowledged-mode data transmission in CPCH/FACH

TS 25.321 v 3.6.0 (2000-12)
MAC protocol specification

Section 4.2.1 MAC Entities
Section 4.2.3 Traffic Related Architecture - UE Side
Section 4.2.4 Traffic Related Architecture - UTRAN Side
Section 4.3.1 Transport channels
Section 4.3.3 Mapping between logical channels and transport channels
Section 6.2.1 Relation between MAC Functions and Transport Channels

TS 25.331 V3.5.0 (2000-12)
RRC Protocol Specification

Section 8.1.5.4.1 Message "RRC Connection Re-establishment" contents to use
Section 8.2.2.3.1 Message "Radio Bearer Reconfiguration" contents to use in CELL_DCH state\The UE shall (among others)
Section 8.2.2.4.1 Message "Radio Bearer Reconfiguration" contents to use in Cell_FACH state/The UE shall (among others)
Section 8.2.3.3.1 Message "Radio Bearer Release" contents to use
Section 8.2.4.4.1 Message "Transport Channel Reconfiguration" contents to use in CELL_FACH state
Section 8.2.6.3.1 Message "Physical Channel Reconfiguration" contents to use in CELL_DCH state
Section 8.2.6.4.1 Message "Physical Channel Reconfiguration" contents to use in CELL_FACH state
Section 8.3.6.3.1 Message xxxx contents to use
Section 9.3.2 CELL_FACH state
Section 9.3.2.5 Radio Resource Allocation Tasks (CELL_FACH)
Section 10 Message and information element functional definition and content
Section 10.1 Radio Resource Control Messages
Section 10.1.1.5 Cell Update Confirm (FDD only)
Section 10.1.4 RRC Connection Establishment and maintenance messages
Section 10.1.4.1 RRC Connection Re-establishment
Section 10.1.4.7 RRC Connection Setup
Section 10.1.5.1 Physical Channel Reconfiguration
Section 10.1.5.4 Radio Bearer Reconfiguration
Section 10.1.5.7 Radio Bearer Release
Section 10.1.5.10 Radio Bearer Setup
Section 10.1.5.13 Transport Channel Reconfiguration
Section 10.1.6.4.11 System Information Block type 9 (FDD)
Section 10.2 Information element functional definitions
Section 10.2.3.26 CPCH Parameters
Section 10.2.4.4 RB mapping information
Section 10.2.6.20 CPCH set info (FDD only)
Section 10.2.6.21 CPCH persistency values (FDD only)
Section 14.7.1 RRC Initialisation Information